Unlike other epoxy resins on the market, EcoPoxy uses bio content without the use of toxic organic compounds or heavy metals. No VOCs, breathe easy! With the ability to cast up to 1.5” thick, FlowCast is perfect for pouring river tables, ocean tables, and any other deep pour applications or casting in silicone molds.

This casting epoxy can be combined with color and metallic pigments to create custom colors and effects, or used by itself for a crystal-clear finish. FlowCast is intended for pours of 0.5” - 1.5” per layer. For thinner coats, we recommend UVPoxy. Once cured, use the same tools that you would use for woodworking on your epoxy project.

Kit includes both Resin (Part A) and Hardener (Part B).

Shop for Epoxy Mold Release Tape here

Shop for additional project supplies here.

Use the EcoPoxy Calculator to determine an approximate amount of epoxy for your unique project.

———

FlowCast Product Information

Mix Ratio

2:1 by volume

Working Temperature

21-27ºC (70-80ºF)

Work Time

8 hours depending on ambient temperature

Cure Time

72 hours depending on ambient temperature, humidity, and thickness

Recommended Thickness per Layer

1/2" - 1.5" per Layer. Maximum recommended pour depth of 1.5”. Not recommended for pours less than ½” depth

Viscosity (Thickness)

Low Viscosity to Fill Tight Spaces and Excellent Air Release

Cure Appearance

Crystal Clear

Bio Content

>20%

Pigments Can Be Added

Yes

Clean Up

Denatured Alcohol

PLEASE NOTE ECOPOXY HAS DISCONTINUED PRODUCTION OF THE 750mL, 1.5L & 3L FlowCast KIT SIZES.