FROM ROUGH SAWN TO FLAT & SANDED
Capable of processing live edge slabs up to 6FT wide and 17FT long, this service provides the perfect foundation to start your project.
Under our Surfacing Service, we start with a rough sawn slab, flatten both faces and then sand each face to 120 grit through our wide-belt sander.
Minimum length = 16 inches
Maximum Length = 204 inches
Maximum Width = 72 inches (48” W for wide-belt sanding)
• All material must be kiln-dried and measure 15% MC or less.
• 3 square feet minimum charge per piece of material
SURFACE/SANDING PRICING*
Width 2ft. or less (Surface and Sand) - $12/sq. ft.
Width 4ft. or less (Surface and Sand) - $18/sq. ft.
Width 6ft. or less (Surface only) - $18/sq. ft.
Cross-Cuts Diameter 6ft. or less (Surface and Sand) - $20/sq. ft.
Resin Casts Width 4ft. or less (Surface and Sand) - $15/sq. ft.
Resin Casts Width 6ft. or less (Surface only) - $15/sq. ft.
Sanding 4ft. or less (Sand only - Material must be flat, no glue, no hardware, no finish) - $6/sq. ft.
*Three square feet minimum per each piece of material